An amber ABS light can appear while the brake pedal still feels normal. That makes it easy to postpone. The vehicle may still stop, but one of its important braking safeguards may no longer be available when a wheel starts to lock on wet, snowy, or icy pavement.
ABS stands for anti-lock braking system. It monitors wheel speed and can rapidly adjust brake pressure during a hard stop so the wheels keep turning instead of locking. That helps the driver retain steering control. It does not create extra tire grip, shorten every stop, or make winter roads safe.
For Warren and Metro Detroit drivers, the timing matters. Michigan State Police recorded 33,840 winter-weather crashes during the 2024-2025 season. That statewide figure does not measure ABS failures or local search demand. It does show why a braking warning deserves a clear response before the next slick commute.
First, confirm which brake warning is on
Most vehicles illuminate several warning lights briefly when the ignition turns on. That startup check is normal if the lights go out after the engine starts. A light that remains on, returns while driving, or appears with another warning needs attention. The owner's manual shows the exact symbols and instructions for your year, make, and model.
The amber ABS light
If the ABS light stays on by itself, the anti-lock function may be disabled even though the conventional hydraulic brakes still operate. The National Safety Council and University of Iowa's My Car Does What program advises having the system checked when the ABS warning remains illuminated. Drive cautiously only if the pedal feels normal, the car brakes normally, and no red brake warning is present. Avoid treating that general guidance as a guarantee that your particular vehicle is safe.
The red brake warning light
A red BRAKE symbol is more urgent. Depending on the vehicle, it can indicate that the parking brake is applied, brake fluid is low, or the hydraulic braking system has detected a serious problem. Make sure the parking brake is fully released. If the red light remains on, the pedal feels soft or sinks, braking power changes, or fluid is visible under the vehicle, stop in a safe place and arrange assistance. Do not keep driving to see whether the warning clears.
ABS plus traction-control or stability-control lights
These systems often share wheel-speed information. A fault in one sensor circuit can therefore trigger more than one warning. The combination does not prove that a sensor needs replacement, but it gives the technician a useful starting point. Note which lights appeared, whether they came on together, and what the car was doing at the time.
What can cause an ABS light?
The warning identifies a system fault, not the failed part. Reading a stored fault code helps narrow the test path, but the code still needs to be matched with circuit, sensor, mechanical, and live-data checks. Common possibilities include the following:
A wheel-speed sensor or its wiring: Each sensor reports wheel movement. Damage, corrosion, contamination, or an open circuit can produce an implausible or missing signal.
A damaged tone ring or wheel-bearing issue: The sensor reads a rotating target. Rust, a crack, debris, excessive bearing play, or physical damage can disturb that signal.
Low system voltage: A weak battery, charging fault, or poor connection can cause several electronic warnings. If the ABS light appeared around a slow start or jump-start, mention it during vehicle diagnosis. Our battery, starter, and alternator guide explains the starting clues worth noting.
An ABS fuse, pump, valve, or control-module fault: These are different failures with different test procedures. A warning light alone cannot separate them.
Low brake fluid on some vehicles: Fluid level and warning logic vary by model. Brake fluid does not normally disappear through use alone without a reason; worn friction material, a leak, or another condition may need inspection.
Road salt and moisture can be hard on exposed connectors and wheel-area components, but finding corrosion near a sensor does not prove it caused the warning. Proper brake and ABS inspection should test the fault rather than jump directly to a parts estimate.
How to drive if the ABS light comes on
If the amber ABS light is the only warning, the pedal feels firm, and the vehicle stops normally, reduce speed, leave more room, and arrange diagnosis soon. Avoid unnecessary trips in snow or ice. If braking changes, the vehicle pulls sharply, the pedal pulses during ordinary light braking, or a red warning appears, stop driving and seek help.
When ABS is working and activates during a hard stop, the pedal may pulse or vibrate. That is the system rapidly changing pressure. My Car Does What advises pressing and holding the brake pedal rather than pumping it, then steering toward a clear path. Keep looking where you want the vehicle to go.
That technique cannot overcome worn tires, excessive speed, or a lack of traction. Michigan State Police advises slowing down, increasing following distance, avoiding abrupt steering and braking, and preparing the vehicle for winter conditions. Review the Michigan winter car checklist for tire, visibility, fluid, battery, and brake checks that support the whole vehicle.
What a useful ABS diagnosis includes
A technician should begin with the warning history and a visual inspection, then use scan data and targeted electrical or mechanical tests. Useful details from the driver include:
whether the light stays on from startup or appears after the car moves;
whether it follows a pothole hit, wheel work, a dead battery, or recent brake service;
which other warning lights appear at the same time;
whether the pedal, steering, or stopping behavior changed; and
whether the warning is constant or intermittent.
A basic code scan may reveal which circuit reported a fault. It does not prove that the named component is bad. For example, a wheel-speed code could come from the sensor, wiring, connector, tone ring, wheel bearing, power supply, or control unit. Testing keeps a useful clue from turning into an expensive guess.
Frequently asked questions
Can I drive with the ABS light on?
If only the amber ABS light is on and the brakes feel completely normal, a short, careful trip to a repair appointment may be reasonable. Anti-lock assistance may be unavailable, so leave extra room and avoid poor conditions. Do not drive if a red brake light is also on, the pedal changes, braking is weak, the vehicle pulls hard, or the owner's manual tells you to stop.
Will low tire pressure turn on the ABS light?
Low tire pressure usually triggers the TPMS warning, not the ABS light. A large difference in tire size or wheel-speed behavior may affect systems on some vehicles, but the light still needs diagnosis. Set all tires to the door-jamb specification and do not assume adding air repaired an ABS fault.
Why did the ABS and traction-control lights come on together?
ABS, traction control, and electronic stability control often use the same wheel-speed sensors and related data. One fault can disable more than one feature. A scan can identify the reporting system, while testing determines whether the sensor, circuit, rotating target, bearing, voltage supply, or another component caused it.
Does an ABS light mean I need new brakes?
Not necessarily. Brake pads and rotors can be worn without turning on the ABS light, and an ABS electrical fault can appear when friction parts still have life left. The inspection should evaluate both the warning and the mechanical condition of the brakes rather than treating them as the same problem.
Get the warning checked before the road gets worse
If an ABS light is staying on, note the other symptoms and avoid waiting for the first slick stop to find out what assistance is missing. John’s Auto Experts can inspect the warning and explain the test results. Request an appointment or call (586) 510-6100.
Sources
Anti-Lock Braking System, My Car Does What, National Safety Council and University of Iowa. Accessed November 21, 2026.
Antilock braking system, Bosch Mobility. Accessed November 21, 2026.
Winter Driving, Michigan State Police, Office of Highway Safety Planning. Accessed November 21, 2026. Crash data covers the statewide 2024-2025 winter season.